The economy is developing continuously, the progress of industry is obvious, and laser cutting technology is very common in industry. With the improvement of processing technology, the cutting accuracy of laser cutting is an important factor to judge the quality of laser cutting machine. Let's learn about the factors affecting the cutting accuracy of C-section steel with C-section steel manufacturers.
C-section steel manufacturers talk about the factors affecting the cutting accuracy of C-section steel
1. Laser agglomeration size of laser generator: if the spot is small after focusing, the cutting accuracy is high, and if the slit is small after cutting. It shows that the precision and quality of laser cutting machine are very high. However, the beam emitted by the laser is conical, so the notch is also conical. In this case, the greater the thickness of the workpiece, the lower the accuracy, and therefore the larger the slit.
2. Table accuracy: if the accuracy of the table is very high, the cutting accuracy will also be improved. Therefore, the accuracy of the worktable is also a very important factor to measure the accuracy of the laser generator.
3. The laser beam condenses into a cone: during the cutting process, the laser beam gradually tapers downward. If the thickness of the workpiece to be cut is very large, the cutting accuracy will be reduced and the slit to be cut will be very large.
4. Cutting materials are different: it will also affect the accuracy of the laser cutting machine. In the same case, the cutting accuracy of stainless steel and aluminum will be very different. The cutting accuracy of stainless steel will be higher and the cutting surface will be smoother.
The above is the relevant knowledge on the factors affecting the cutting accuracy of C-section steel sorted out by the C-section steel manufacturer. I hope you can help after reading it. If you want to know more relevant information, you can pay attention to our website.
热门产品 / HOT PRODUCT